Reverse Dependencies of pyserial

The following projects have a declared dependency on pyserial:

• pyavcontrol — Python Control of Audio/Visual Equipment (RS232/IP)
• pyaware — Framework for reading connected devices and publishing to the AWARE cloud
• pyB12MPS — A Python Package for Interfacing with the Bridge12 MPS
• pyB12SPS — A Python Package for Interfacing with the Bridge12 Shim Power Supply
• PyBarobo — Native Python Barobo robotics control library
• pybartelslabtronix — Automate the Bartels Mikrotechnik labtronix micropump driver
• pybecker — pybecker is a library to control becker RF shutters
• pybehave — Pybehave
• pybelt — An Python library to control the feelSpace naviBelt from your application
• pybgapi — Python interface for the BGAPI binary protocol
• pyBittle — Open source library for connecting and controlling Bittle.
• pybk8500 — BK-8500-Electronic-Load python library
• pyblackbird — Python API for talking to Monoprice Blackbird 4k 8x8 HDBaseT Matrix
• pyblackbirdbn — Python API for talking to Monoprice Blackbird 4k 8x8 HDBaseT Matrix
• pybldc — Tool for flashing a VESC via CAN-bus or serial/USB using Python.
• pyblhost — Python implementation of blhost used to communicate with the NXP MCUBOOT/KBOOT bootloader
• pyboltwood — Official Boltwood Cloud Sensor III Serial API Python wrapper
• pybpg400-tspspi — Unofficial library to control and read the BPG400 pressure gauge via RS232C interface
• pybpod-api — BPod Python API
• pybtool — bluetooth tool
• pybuildit — python API for Buildit Actuator
• pybuildit2 — python API for Buildit Actuator (For Buildit Actuator v1.0.1 and above
• pycad — python lib raspberry
• pycatalicism — Program controls catalytic activity of materials measurement equipment as well as calculations
• pyceleroton — An API for the celeroton frequency converters.
• PyCmdex — The PyCmdex is a package used to control microcontroller board running the Cmdex firmware.
• pycoax — IBM 3270 coaxial interface
• pycomfospottwin40 — Read the Zehnder Comfospot Twin 40 status from Python.
• pycoolmaster — Lightweight Python API for older (RS232-only) CoolMaster HVAC bridges
• pycreate2 — A library to control iRobot Create 2 with python
• pycyphal — A full-featured implementation of the Cyphal protocol stack in Python.
• pydaq — Data Acquisition and Experimental Analysis with Python
• pydevmgr-serial — based pydevmgr object for serial communication
• pydhgripper — Python library for controlling the DH gripper
• PyDMX-Drivers-Arduino — Device drivers for PyDMX for Arduino-based devices. Not affiliated with Arduino.
• PyDMXControl — A Python 3 module to control DMX using OpenDMX or uDMX. Featuring fixture profiles, built-in effects and a web control panel.
• pydobot — Python library for Dobot Magician
• pydobot2 — Python library for Dobot Magician
• pydobotplus — Python library for Dobot Magician upgraded
• pydotbot — Package to easily control your DotBots and SailBots.
• pydp832-tspspi — Rigol DP832 power supply control library (unofficial)
• PyDSlog — Sensor data acquisition library.
• pyducontrol-csongoose — A small package for communicating with an arduino using commands
• pyduin — Extensive Arduino abstraction
• pyduofern — Library for controlling Rademacher DuoFern actors using python. Requires the RademacherDuofern USB Stick Art.-Nr.: 70000093
• pydwm1001 — A Python library for interfacing with DWM1001
• pydxl — Python package to use Dynamixel servos through a serial interface.
• pyedbglib — Low-level protocol library for communicating with Microchip CMSIS-DAP based debuggers
• pyenttec — Control an Enttec Pro DMX from python.
• PyESCPOS — Support for Epson ESC/POS printer command system.
• pyetta — Tooling for automated testing on embedded bare metal platforms.
• pyewelink — ewelink client debug tools
• pyfingerprint — Python written library for using ZhianTec fingerprint sensors.
• pyFirmata — A Python interface for the Firmata procotol
• pyFirmata2 — Use your Arduino as a data acquisition card under Python
• pyFIS — A library for controlling devices in the passenger information realm
• pyfitterbap — Fitterbap python bindings
• pyflipdot — Simple python driver for Hanover flipdot displays
• pyfrigel-tcp-serial-handler — Frigel TCP to serial handler for PEMS protocol
• pyftdi — FTDI device driver (pure Python)
• pyftdiwin — Python FTDI library for Windows
• pyfy6900-tspspi — (Unofficial) control library for the FY6900 function generator
• pygarmin — A Python interface to older Garmin GPS equipment
• pygatt — Python Bluetooth LE (Low Energy) and GATT Library
• pygattpi — Python Bluetooth LE (Low Energy) and GATT Library, forked from peplin/pygatt
• pyglaze — Pyglaze is a library used to operate the devices of Glaze Technologies
• pygmc — Python package for Geiger–Müller Counter (GMC)
• pygnssutils — GNSS Command Line Utilities
• PyGPSClient — GNSS Diagnostic and UBX Configuration GUI Application
• pygpt-net — Desktop AI Assistant powered by GPT-4, GPT-4V, GPT-3.5, DALL-E 3, Langchain LLMs, Llama-index, Whisper with chatbot, assistant, text completion, vision and image generation, internet access, chat with files, commands and code execution, file upload and download and more
• pygsmmodem — A Python package for interacting with GSM modems
• pygt521f32 — An SDK module for the ADH-Tech GT521F32 fingerprint scanner
• pyhamilton — Python for Hamilton liquid handling robots
• pyhottop — Interface for interacting with Hottop KN-8828b-2k+ roasters
• pyHydrabus — Hydrabus BBIO python bindings
• pyIBIS — A library for sending and receiving IBIS (VDV 300) and MONO telegrams
• pyIcarus — Tools library for Security Research
• pyIlluminate — no summary
• pyilper — Virtual HP-IL devices for the PIL-Box
• pyImpinj — Library for Impinj R2000 Reader
• pyinfuse — Pyinfuse
• pyinovonics — Inovonics serial protocol implementation
• pyinst — no summary
• pyinsteon — Open-source Insteon home automation module running on Python 3.
• pyIOT — Simplifies driver development for Amazon's IOT-Core service
• pyIPCMini — pyIPCMini is a package to communicate and control via USB/serial the ion pump controller type IPCMini from Agilent.
• pyirbrain — Library for IR-Brain Products
• pyIthoRFT — A python3 library to emulate an IthoRFT remote
• pyjuni — Library for Junilab Products
• pyka3005p-tspspi — Korad KA3005P power supply control library (unofficial)
• pyKamibot — A Python Library For Kamibot
• pyKamipi — A Python Library For Kamibot-Pi
• pykarbon — Tools for Karbon hardware interfaces.
• pykeigan-motor — Python Library for Keigan Motors (v2)
• pykiso — Embedded integration testing framework.
• pykiss — Simple serial KISS library
• pykitcommander — Collection of tools for cloud provisioning of Microchip IoT kits
• pyKiwrious — Support programming with Kiwrious sensor
• PyKMP — Library for the KMP protocol used with Kamstrup electricity/energy meters (e.g. MULTICAL® 30x/40x/60x).
• pylablib — Code for use in lab environment: experiment automation, data acquisition, device communication